Page 4 of 7
201015
ASSEMBLY INSTRUCITONS (continued)
FUNCTION AND OPERATION
Sensitivity of Motion Sensor
● You can adjust the sensitivity of the motion sensor by using the “SENS” selector located on the right side of
the sensor head. (See Fig. 5)
● Adjust motion sensor sensitivity to HIGH (H), MEDIUM (M), or LOW (L) to achieve desired performance.
● Approximate range for each setting: 70 ft. (H), 45 ft. (M), 20 ft. (L).
Adjusting the Light Head (B):
1. Adjust the light head up or down, left or right for desired area. Keep the light heads at least 1˝ (25mm) away from
the sensor.(See Fig.4)
2. Keep the light heads (B) face down around 30 degrees angle to avoid water damage and electrical shock.
Fig.5
Choose a mode by sliding the switch on the bottom of the sensor of the fixture.
(See Fig.5)
Note: When power is first applied, the light will be on and warm up lasts
30 seconds.
1. TEST MODE (daytime and nighttime operation.)
● Rotate Time knob arrow on the left side of the sensor head to the
“TEST” position.
● The light turns to high-level brightness (5000K) when motion is detected,
and stays on as long as the motion continues. Then it reverts back to
low-level brightness (2700K) about 5 seconds after motion is no longer
detected.
2. OFF MODE (nighttime operation only)
● In "OFF" mode, slide the Time Delay knob to the desired time(30s/1min/3min). At dusk, the light stays off,
the light turns to high-level brightness (5000K) when motion is detected, and stays on as long as motion continues.
When the motion is no longer detected, it remains on for the predetermined shut-off delay time you set
(30s/1min/3min), and then turns off automatically.
● The light turns off automatically at dawn.
3. AUTO MODE (nighttime operation only)
● To “AUTO” mode, rotate “Time” knob to the desired time setting (30s/1min/3min). At dusk, the light turns on
to low-level brightness (2700K). When motion is detected, the light turns to high-level brightness (5000K) and
stays on as long as motion continues. When the motion is no longer detected, the light at high-level brightness
(5000K) remains on for the predetermined time you set (30s/1min/3min), then switches back to low-level
brightness (2700K) automatically.
● The light turns off automatically at dawn.
4. PC MODE (nighttime operation only)
● In "PC" mode, the light will turn on at full brightness (5000K) at dusk and remains on until dawn .
Fig. 4
B
B
B
