background image

Page 7 of 7

 201015

 

Problem

Possible Cause

Solution

The lights turn off too late in

the PC setting.

The lights stay on continuously.

The light fixture may be installed in a

relatively dark location.

Relocate the light fixture or use the

 3 hour setting.

  

 The motion sensor may be picking up

    a heat source, such as an air vent, 

    dryer vent, or brightly painted, 

    heat-reflective surface.

    

 Decrease the “SENS” setting or

    reposition the motion sensor.

    

 Switch the motion sensor to auto. 

    See Using manual mode on page 5.

    

 Do not use a dimmer or timer to

    control the light fixture. Replace the 

    dimmer or timer with a standard 

    on/off wall switch.

      

Install the light fixture on a circuit 

     without motors, transformers, or 

     fluorescent bulbs.

  

 The motion sensor is in manual mode.

  

 The light fixture is wired through a

    dimmer or timer.

The light fixture is on the same circuit

as a motor, transformer, or fluorescent

bulb.

The lights flash once then

stay off in manual mode.

The lights flash on and off.

The motion sensor is detecting light from

the lamp heads.

Reposition the lamp heads to keep 

  the area below the motion sensor 
  relatively dark.

  Heat or light from the lamp heads may

   be turning the motion sensor on and off.
  Heat is being reflected from other objects

  and may be turning the motion sensor on

  and off.

    

 The motion sensor is in “TEST” mode

    and warming up.

     

Reposition the lamp heads away 

    from the motion sensor.

     Decrease the “SENS” setting

     or reposition the motion sensor.

       

While in “TEST” mode, the light only 

    stays on for 30 seconds. Set the

    “TIME” switch to 30s,1min,3min.

TROUBLE SHOOTING (CONTINUED)

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST  

FIVE-YEAR LIMITED WARRANTY: 

If, during normal use, this PATRIOT LIGHTING   lighting fixture breaks or fails 

due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this 

lighting fixture with the original sales receipt back to your nearest MENARDS   retail store. At its discretion, PATRIOT 

LIGHTING   agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT 

LIGHTING   product or part free of charge, within the stated warranty period, when returned by the original purchaser 

with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does

not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to 

persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary

from state to state.

R

R

R

R

If unable to fix any of the above issues, please consult a certified electrician.

Summary of Contents for E9201-2BZ








Reviews: