2
SAFETY INFORMATION
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
• This product has been manufactured with the highest standards of safety and quality.
• For energy savings, this portable luminaire has been engineered to safely use a self-ballasted LED bulb in place of an
incandescent bulb.
• Before assembling your portable luminaire, spread all parts out on a clean surface. Inspect each part for defects that may
have occurred during shipping.
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter
the plug.
IMPORTANT:
Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If
there is a defect in the wire, do not continue the assembly process.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package
contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
ASSEMBLY INSTRUCTIONS
2. Screw in the lower
tube (G) onto the base
(H). Screw in the middle
tube (F) into the lower
tube (G).
3. Screw in the upper
tube (E) and socket
assembly (B) into the
middle tube (F) .
1. Screw in the adjusting
tube (C) into the socket
assembly (B).
NOTE:
Do not twist the
power cord.
4. Unscrew the socket
ring (AA) from the socket
of the socket assembly
(B), place the shade
(A) onto the socket and
secure with the socket
ring (AA).
1
3
2
4
F
E
B
G
F
B
B
A
H
C
AA
