![background image](http://html1.mh-extra.com/html/patriot-lighting/ds18461/ds18461_manual_3993884003.webp)
3
CARE AND MAINTENANCE
TROUBLESHOOTING
• Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
•
To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a
dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
1) The light does not come on at all:
a. Make sure the wall switch and circuit breaker are on.
b. Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a. Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
FIVE-YEAR LIMITED WARRANTY:
If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a
defect in material and workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture
with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT LIGHTING agrees to
have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT LIGHTING product or part
free of charge, within the stated warranty period, when returned by the original purchaser with original sales receipt.
This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does not cover damage that has
resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/property or costs. This warranty
does give you specific legal rights and you may have other rights, which vary from state to state.
®
®
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-388-6141 ext: 216
Monday - Friday 9:30 a.m. - 3:00 p.m. EST.
For customer service support and the fastest response, please email us at
®
®
ASSEMBLY INSTRUCTIONS (continued)
5. Install the light bulb
to socket (not included).
Use
Max 60W medium
base (E26) type "A"
bulb or LED equivalent.
6.
To adjust the overall
height:
Loosen the
adjusting screw (D) and
adjust to the desired
position then tighten the
adjusting screw (D) to
lock into place.
To adjust the shade:
Loosen the knob on
the side of the socket
assembly (B) and adjust
to the desired position
then tighten the knob to
lock into place.
• Plug into the wall
outlet, turn on the
switch and enjoy.
5
6
D
B