,
,
- Prior to installation of this fixture or removal of a previous fixture, disconnect the power by turning off
the circuit breaker or by removing the fuse at the fuse box.
Use bulbs specified by the marking and/or labels on the fixture. Consult a qualified electrician to ensure correct
branch circuit conductor.
- Consult a qualified electrician for installation of this fixture.
- Read all instructions before installing.
There are too many items on
1. Bulb is burnt out
Bulb will not light.
Fuse blows or the circuit breaker trips
when light is turned on.
2. Power is off
3. Faulty wire connection
4. Faulty switch
one circuit
Unplug the other items on the circuit
Please read and understand this entire manual before attempting to assemble operate or install the product.
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
RISK OF FIRE
This product must be installed in accordance with the applicable installation code by a person familiar with the contruction and
operation of the product and hazards involved.
- Turn off the fixture before replacing the bulb(s)
Wipe clean using soft, dry cloth or static duster.Always avoid using harsh chemicals and abrasivves to clean fixture as they may
damage the finish.
1. Replace light bulb
2. Check power supply
3. Check wiring
4. Test or replace switch
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
CARE AND MAINTENANCE
TROUBLESHOOTING
SAFETY INFORMATION
