HOW TO PAIR THE REMOTE TRANSMITTER & RECEIVER COLLAR
If your Receiver Collar does not beep when the TONE Button on the
Remote Transmitter is pushed, or if you feel the Receiver Collar is not
responding to the Remote Transmitter, follow these steps to pair them:
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
Restart, press, and hold the On/Off Button until the Green LED
flashes every second on the Receiver Collar. This continues for 16
seconds, within which pairing should be completed.
2. Press and hold the TONE and VIBRA Button on the Remote
Transmitter at the same time until the Green LED Light on the
Receiver Collar flashes rapidly 5 times, indicating pairing is
completed.
Two Dog System
NOTE: If you wish to add another Receiver Collar to the training
system, extra Receiver Collars are available where you bought your
unit.
Remote Transmitter
1. Set the Toggle Switch to 2.
2. Turn on the Receiver Collar for Dog 2. Press any Mode Buttons to
verify function.
3. If the Dog 2 Receiver Collar does not respond, pairing may be
needed.
Repeat the steps from How to Pair the Remote Transmitter & Receiver
Collar above.
16
