CHARGING THE BATTERY
The unit uses Lithium-Polymer batteries.
1. Charge the unit before using it for the first time.
2. Do not charge the batteries near any flammable substances.
3. Fully charge the batteries if the unit is to be stored without use for a
period of 3 months or more.
Recharge the unit if:
The indicator light on the collar is rapidly flashing red.
The 3 bar indicator on the Transmitter LCD shows just 1 bar.
The indicator light on the Transmitter or Receiver will not come on.
The indicator light on the Transmitter or Receiver comes on
momentarily when any of the Mode Buttons is pushed.
Battery Charging Procedure:
NOTE: The unit has a partial charge when it leaves our facility. Upon
receipt of the collar, be sure to give it a 4-hour initial charge before the
first use.
1. Lift the rubber covers protecting the Transmitter and Receiver Collar
Charging Jacks.
2. Connect the charger connectors to the Transmitter and Receiver
Collar Charging Jacks, as shown below.
3. Connect the USB port to the Charging Adapter.
4. Plug the charger into a standard wall outlet.
5. Charge the unit for 4 hours for the first charge. Recharges only take
2-3 hours.
14
