30 | P a g e
PATON
®
PSI STANDARD SERIES DC MIG/MAG TIG/MMA
13. DELIVERY SET
1.
Welding unit with a power cable 3 m in length
– 1 pcs;
2.
The welding cable 3 m in length with an electrode holder
– 1 pcs;
3.
The welding cable 3 m in length with a grounding clamp
– 1 pcs;
4.
Rollers for 0.6 -0.8 mm and 1.0 -1.2 mm welding wire
– 1 pcs;
5.
The quick-release nipple for a gas hose
–
1 pcs;
6.
Cardboard packaging
„PATON
®
”
– 1 pcs;
7.
Operation manual of device
– 1 pcs;
14. WARRANTY
The Pilot Plant of Welding Equipment of the E.O Paton Electric Welding Institute
guarantees the
correct operation of the power supply if the costumers provided service conditions, storage and
transportation.
ATTENTION!!!
Warranty commitments are cancelled in case of mechanical
damage.
Term of the main guarantees for welding inverter series Standard is 5 years. The basic warranty
period is calculated from the date of sale to the end customer of the inverter equipment.
During the main warranty period, the seller covenants charge the inverter equipment of
PATON
®
to the
owner:
1.
To diagnose and determine the cause of failure,
2.
To ensure the necessary repairs to units and elements,
3.
To carry out work on the replacement of defective components and units,
4.
To test the repaired equipment.
The basic warranty obligations do not include devices:
1.
Mechanical damage affected the availability of the device (deformation body parts and in
consequence of a fall or drop heavy objects on the equipment, loss of pins and connectors)
2.
Traces of corrosion that caused the fault condition,
3.
The failed because of the impact on its power and electronic elements abundant moisture,
4.
The failed due to the accumulation of conductive dust inside (coal dust, metal chips, etc.),
5.
In case of attempting to repair its nodes and / or replacement of electronic components,
Once on six months,
clean internal parts and components with compressed air when removing the
protective box in order to avoid exit of the unit system on the equipment. Cleaning should be carried out
carefully, keeping the compressor hose at a sufficient distance to avoid damage to the soldering of
electronic components and mechanical parts.
Also, the basic warranty does not apply
to defective external elements of equipment that exposed to
physical contact and the attendant / supplies. Claims on the fallowing items are accepted no later than two
weeks from the date of sale:
1.
Pins on and off,
2.
Knobs of the welding parameters,
3.
Cabling connectors and sleeves,
4.
Connectors management
5.
The power cable and power plug,
6.
Carrying handle, shoulder strap, carrying case,
7.
Electrode holder, earth clamp, burners, bayonet connectors, welding cable, hose.
Summary of Contents for PSI 160 Standard
Page 1: ......
