9 | P a g e
PATON
®
PSI STANDARD SERIES DC MIG/MAG TIG/MMA
1.
The buttons for setting the welding current and parameters of the welding function (by default: in
MMA
mode
- welding current, in
TIG mode
- welding current, in
MIG/MAG mode
- welding
voltage);
2.
Digital display showing the current value and welding functions;
3.
Button for adjusting the function of the selected welding method
4.
Button for selecting welding method:
a)
Manual covered-electrode arc welding
(MMA);
b)
Argon arc welding with a no consumable electrode
(TIG);
c)
Gas-shielded semiautomatic arc welding
(MIG/MAG)
;
5.
Indicator of the operating condition of the welding unit, do not light normally (blinks when
machine is overheating)
6.
Button "WIRE INSTALLATION" (When the button is pressed, gas feed is switched off);
7.
Button for adjusting the wire feed speed and parameters of the feeder function
8.
Digital display showing the wire feed speed and feeder functions,
9.
The buttons on the MIG/MAG handle (2T/4T mode);
10.
Button “GAS TEST” When the button is pressed, only the gas supply valve is switched on
11.
Button for adjusting the function of wire feeder.
12.
Euro connector socked for connecting the MIG/MAG holder
13.
Polarization change cable
14.
Push-button switch for switching on and off the welding unit
15.
Fuse
16.
Socket for supplying protective gas to the welding torch in MIG/MAG method
17.
Protective cover
18.
Protective cover lock;
А. (+) The bayonet connector socket for connecting:
a)
The electrode cable (or the grounding cable in some cases when special electrodes are used
for welding) for the manual arc welding process
(MMA)
;
b)
Only the grounding cable for the argon arc welding process
(TIG);
Summary of Contents for PSI 160 Standard
Page 1: ......
