40
The Information screen shows how many lights are currently Tech
Locked, under the “Locks” tab.
Default [Intensity/Color/Position/Shape]:
Sets the selected light’s attribute to the default value. The default results are
dependent on the light and will be recorded in any subsequent record operations.
Release [Intensity/Color/Position/Shape]:
Releases changes made since the last RECORD action, to the chosen attribute
of selected light(s).
Advanced Release is an attribute-specific equivalent of the general
Release button. Allows the selective discard of the changes made to a light,
unlike the general Release button which discards all changes made to the light.
For example, allows you to discard changes to a light’s color while keeping the
new position the light is using.
Knockout [Intensity/Color/Position/Shape]
Applies to all attributes associated with the selected attribute family. Knockout
removes the action of the last cue. The affected attributes of the light will revert
to their value in the previous cue. Use Knockout to remove attributes from a cue,
and allow the values set in the previous cue to “track” through. The current cue
must be updated to make the changes permanent.
Knockout Light
Only available from CONTROL>Intensity>Advanced. Removes any changes to
all attributes of the light in the present cue. Allows all attribute values to track
through from the previous cue. The current cue must be updated to make the
changes permanent.
Shift Button Short Cuts and Extensions
The Shift buttons may be used to select, or deselect, ranges of lights on the touch
screen. Touch the first light required. Press and hold the Shift button, then touch the
last light of the range desired.
The Shift buttons provide additional functions when used with other buttons on the
console. Press and hold the Shift button (either one) then press the second button or
icon from the list below, to access the desired action or function.
Shift
+ Button
Action/Function
Pin
Allows adjustment of Pin crossfade time
Go
Asserts cue on one second fade time
Pause
Releases the Playlist assigned to the selected Playback
Help
Closes the Hints overlay (not the Tutorials)
Record
In PLAY, updates current Cue or Memory (instead of recording to
next available location)
Bump (Momentary)
Forces the button action to latch ON (toggle)
Bump (Toggle)
Forces the button action to bump ON (momentary)
Bump (Radio)
Forces up an active radio button (clears radio group)
Attribute ABCD
buttons
In CONTROL, when the ABCD button is pressed once, sets
associated attribute to the default value. If applicable, when
pressed a second time, attribute is set to its low limit; when
pressed a third time, attribute is set to its high limit.
Summary of Contents for Cognito
Page 2: ...2...