background image

SETTING THE TIME

To set the time, gently pull the crown all the 
way out to position 2 and turn it clockwise or 
counter-clockwise in order to move the hands 
forwards or backwards. Once you have set the 
correct time, push the crown home again into 
position 1.
We recommend setting the time by moving the 
hands in a clockwise direction. If you do none-
theless decide to set the time by turning the hands 

counter-clockwise, first move the minutes hands 

back a little further than necessary and then com-
plete the setting clockwise so as to reduce any 
gear backlash. It is important to note that setting 
the time in one way or the other entails no risk 
of damage to the movement.

Caution 

The time should never be set while the grande 

or petite sonnerie or minute repeater is in operation, nor for 
30 seconds thereafter.

SELECTING THE STRIKEWORK MODE: 

GRANDE SONNERIE, PETITE SONNERIE, SILENCE

On the side of the case at 6 o’clock, there is a 
slide switch that can be used to select the desired 
strikework mode:
-   If the slide switch is in the intermediate posi-

tion at 6 o’clock (position “G” on the picture), 
the 

grande sonnerie

-mode is active.

-   If the slide switch is pushed left, towards  

9 o’clock (position “P” on the picture, slide 
switch hand-engraved with the inscription  
“petite”), the 

petite sonnerie

-mode is activated.

-   If the slide switch is pushed right, towards 

3 o’clock (position “S” on the picture, slide 
switch hand-engraved with the inscription  
“silence”), the 

grande

 and 

petite sonnerie

 are dis-

abled and the “silence” mode is activated. It is 
important to note that, even in “silence” mode, 
the minute repeater can still be activated on 
demand.

USING THE MINUTE REPEATER

The minute repeater strikes the time on demand 
at any given moment. This is done by pressing 
the pusher in the winding crown (indicated by 
“MR” on the picture) all the way in and then 
releasing it. The watch strikes the hours (on low-
pitched tones), the quarter-hours (simple, double 
or triple sequence of three pitches – high, low, 
medium – for each quarter-hour) and the minutes 
(high-pitched tones). No time-setting should be 
done while the minute repeater is in operation, 
nor for the 30 seconds after the last strike.

Kindly wait until the repeater has finished striking 

before activating it again. Caution: Never actuate 
the winding crown while the repeater is in opera-
tion, nor for 30 seconds thereafter.

Actuating the minute repeater while the 

grande

 or 

petite sonnerie

 are striking or about to strike will 

cancel the grande or petite sonnerie indication 
in progress. The minute repeater mechanism will 
override the other strikework modes and audibly 
indicate the time on demand.

  P G S

MR

1

2

Summary of Contents for 6301
















Reviews: