Patchwork Technology BlackBox Advance Operating Instructions Manual Download Page 37

Page: 37 / 56

Job Screen

Overview

The Job screen uses a 3D guidance view to display area covered, guide lines
and off track information.

Start/Pause
Boundary

End
Boundary

Toggle
Guidance

Recording
On/Off

*Purge

On/Off

*Purge

Settings

Menu

Lock / Unlock

Information Panel

Start/Pause Boundary

Starts and

pauses a field boundary map job, see
page 40 for details.

End Boundary

Manually closes a

field boundary map, see page 41 for
details.

Toggle Guidance

Switches between

AB line and Headland guidance. The
‘Guidance Line Number’ will display
‘

’ for AB line and ‘

’ for Headland.

Recording On/Off

Displays the

current status of the Coverage Area
Recording and pressing switches it on/
off (if the On/Off method is set to ‘On
Screen’ see page 28).

Lock / Unlock

Locks / Unlocks the

current guidance line. In AB line mode
the line is automatically unlocked
when turning greater than 60 degrees.

Mini Map

- Displays a 2D overview of

the field boundary and area covered.
N.B.  If  using  Headland  Warning  (see
page  23)  the  mini  map  needs  to  be
hidden (see Menu below)

Menu

Opens the job screen options,

see page 39 for details.

Information Panel

- Displays various

information relating to the system and
the current job, see page 38 for
details.

Mini Map

Only available when

using section control

Guidance Line Number

Summary of Contents for BlackBox Advance

























































Search results

Summary of Contents for BlackBox Advance

Reviews:

Patchwork Technology BlackBox Advance, Operating Instructions Manual, Page: 37 / 56

Search results

Summary of Contents for BlackBox Advance

Reviews: