Operator's Manual
DS 50 / 0002
12
5 SYSTEM OPERATION
The LMI System DS 50 allows the operator to assess and evaluate the lift to meet the manufacturer
specified load charts for the crane.
The correct setting is of utmost importance for the proper functioning of the system and the
crane. Therefore, the crane must not be operated without setting the appropriate operating
code.
5.1 Operating Mode Selection
start function:
(automatically
after system start)
•
Manually
at each modification of the crane
configuration by pressing key,
The operating mode key and the cursor keys
light up. The operating mode selection is
displayed:
XX= present operating code
select mode:
•
use cursor keys
and
to modify
the operating code
confirm
selection:
•
By pressing again, key
.
The cursor keys and the operating selection
key go out.
NOTE:
If the system is turned off, all
adjustments remain stored. When the system
is turned back on, the adjustments can be
acknowledged by merely pressing key:
(if the crane configuration has not been
modified!).
Summary of Contents for DS 50
Page 2: ......
Page 4: ......
Page 8: ...Operator s Manual DS 50 0002 4 Fig 1 Components of the LMI system PAT DS 50...