SL600 / SL600E Lock User Guide
②
After running the App, choose ‘Free mode’ on the setting tab.
③
Then, you can freely choose any available lock to operate.
To access your mobile device, please set your lock for CSN Free mode and
change the usage mode to Free mode from the Passtech APP from your
mobile device.
3.4 Open in Emergency
①
In case User loses user card, Operator can open the lock by Master Card I.
②
Master card can be set by Set up Card.
③
Once Master card I is used to open the lock, the lock reverts to default position
④
User Card ID will be erased from the lock if Master Card I has the function to delete the
User ID.
⑤
When the lock stops working due to low battery, lock can be opened by external
emergency battery pack.
3.5 Low Battery warning and battery change
The RFID lock uses 4 pieces of AA Alkaline batteries (6V).
(1) When battery reaches to low voltage ;
①
Beep sounds five times.
②
Red LED lights
③
Low battery is recorded in the memory of the User Card (Operator can know the low
battery of the lock when the card is read at operator’s Program).
(2) Changing battery
①
Open the battery case at main case.
②
Replace with new batteries..
③
When you pull out the battery, and if you do not insert the batteries in 3 minute, the clock of
the lock returns to default time.( 1
st
. Jan, 2010 )
④
Please use Maintenance card to set the time of the lock.
(For setting of Maintenance card, please refer to LOS (Locker Operation System) User
Manual or Esmart ultra client user manual.
