17
How do I bleed air from my system?
When draining and refilling your spa, the pump may become air
locked. An air-locked pump stops water from flowing in your spa
and is easily resolved by bleeding off the trapped air. To do this:
•
Turn off all pumps
•
Open the access panel below the topside control panel
•
Loosen a heater union until you hear the trapped air escape
•
Once water drips out in a continuous stream, hand tighten the
union until the water stops leaking
•
Loosen the discharge union on Pump 2 as above
•
Turn on all pumps to make sure that there are no leaks
•
Put the access panels back on
