11
X
s
Preamp Owner’s Manual
available. More frequently users will simply wish to use Tape In as
the 7
th
input.
That pretty much covers the gamut of available inputs, next we
have the three outputs which also are available both single ended
and balanced. Two are considered “Master” (main) and one “Slave”
(auxiliary). Any or all outputs may be utilized at the same time in so
much as each one has it’s own output buffer and is fully independent
of all other outputs .
The Master (main) outputs track the volume control directly in 0.5
dB steps (-89.5 dB 9.5 dB) as indicated on the main display
as true gain figures.
The Slave (auxiliary) outputs may be set equal to or less than the
levels of the Master (main) outputs. Once set from the front panel
of the control chassis the Slave (auxiliary) outputs will accurately
track the Master (main) from either the front panel volume control
or the hand remote.
Immediately to the left of the outputs a pair of five way binding
posts which supply a 12 volt DC signal to control “on/off ”
functions on a number of power amps.
Next to that pair of binding posts and at the extreme left hand side
of the rear panel as single locking powerCON connector.
