Revised: July 27, 2017
Revision 7 of DOCU292, © Copyright
Page 23 of 26
cleared when the next aim or park cycle starts.
required actions for the most common messages.
Message
Explanation/Required Action
Electronics Box Messages
Warning
Electronics box nearing high
temperature limit.
Contact a Pason field technician or
Pason Technical Support for assistance.
Information Electronics box warming up.
Please wait.
No action required.
Aimer Messages
Error
Aiming failed. Latitude and
longitude not available from GPS.
1. Ensure that the electronics box has
a clear view of the sky, then try
aiming again.
2. If the error continues, contact a
Pason field technician or Pason
Technical Support for assistance.
Aiming failed. No signal found.
1. Ensure that the dish skid is pointed
in the right direction for the Anik F2
satellite.
2. Verify that the dish has a clear view
of the sky.
3. Check the electronics box cables for
loose connections or damage.
4. Try aiming again.
5. If you experience repeated failures,
contact a Pason field technician or
Pason Technical Support for
assistance.
Info
Operation cancelled.
The most recent aim or park operation
was cancelled.
Satellite signal detected.
The modem detected a satellite signal.
Aiming succeeded.
The most recent aim operation was
successful.
Motion Controller Messages
Error
Motion controller calibration error.
Contact a Pason field technician or
Pason Technical Support for assistance.
A motor stalled. Please retry your
operation.
1. Check if snow, ice or something else
is preventing the dish from moving.
2. Retry the operation.
3. If you experience repeated failures,
contact a Pason field technician or
Pason Technical Support for
assistance.
Motion control feedback error.
Please retry your operation.
1. Check the electronics box cables for
loose connections or damage.
2. Retry the operation.
3. If you experience repeated failures,
contact a Pason field technician or
