manualshive.com logo in svg

Paso DMX 8008, User Manual, Page: 16 / 52

Share
Download
Paso DMX 8008 User Manual Download Page 16

2.3.2.4   NAMING - SAVING AND LOADING UNITS

2.3.2.5   CHANGING INTERFACE

To change to one of the other interface types supported, first remove all units from the main window then:
- click the button on the upper left. Depending on the interface currently selected, the text on the button is 
"USB-COMx", "RS485-COMx" or "TCP/IP".
The following dialog window is displayed:

- Under "Select Connection" select the interface desired ("USB", "RS485" or "TCP/IP").
- For "RS485" the number of the port used for this interface must be selected under "Select COM". For "USB" 

the serial interface that simulates the driver for this software must be selected under "Select COM". Check 
the settings of the operating system for the appropriate COM interface or use the button "Search" to have it 
determined automatically.

The respective settings of the operating system can for example be found under: 

_ Control Panel_System 

Properties (Hardware)_Device Manager_Ports (COM and LPT).

If  there  are  conflicts  with  other  units,  the  number  of  the  COM  interface  may  be  changed  here  (

e.g. 

via_Properties_ Port Settings_Advanced...

).

Note:

 To avoid communication problems, it is recommended to manually change the COM numbers 10 and 

higher that are automatically assigned by the computer to the COM numbers 1 to 9.

14

DMX 8008

Summary of Contents for DMX 8008





















































Reviews:

No comments