5
DAG9300
3.4 Abbinamento toni d’allarme/tasti contatti
I.tasti.
TONE 1÷TONE C
(
8
).permettono.di.riprodurre.uno.dei.dodici.
toni.disponibili..Il.tasto.TONE.1.corrisponde,.come.selezione.tono,.al.
contatto.1,.il.tasto.TONE.2.al.contatto.2.e.così.via.sino.al.tasto.TONE.
C.che.corrisponde.al.contatto.12.
Il.tasto.MSG.1.corrisponde.al.contatto.M1,.il.tasto.MSG.2.corrisponde.
al.contatto.M2.
E’. possibile. abbinare. ad. ogni. tasto. TONE. uno. qualunque. dei. toni.
disponibili. (vedere. la. tabella. di. riferimento. a. pag.. 8).. Per. effettuare.
questo.abbinamento.procedere.nel.modo.seguente:
1). Abilitare. l’altoparlante. e. regolarne. il. volume. per. permettere. un.
adeguato.ascolto.dei.toni..Se.il.display.mostra.un.carattere.diverso.
dal.trattino.(“-”).premere.brevemente.il.tasto.VIS/STOP.(apparirà.il.
carattere.“-”).
2). Premere. e. mantenere. premuto. il. tasto. VIS/STOP. (circa. quattro.
secondi).finché.il.trattino.(carattere.“-”).inizia.a.lampeggiare.
Premendo. uno. dei. tasti. TONE:. verrà. riprodotto. il. tono. attualmente.
abbinato.al.tasto.stesso;.per.selezionare.un.nuovo.tono,.premere.in.
successione.il.tasto.fino.ad.ottenere.in.altoparlante.il.tono.desiderato..
Per.memorizzare.il.nuovo.abbinamento.tasto/tono.è.sufficiente.premere.
il.tasto.SET/REC.(6)..
Qualora. non. si. volesse. memorizzare. il. nuovo. abbinamento,. sarà.
sufficiente. premere. nuovamente. il. tasto. VIS/STOP:. in. questo. modo.
verrà.ripristinato.l’abbinamento.tasti/toni.precedente.
3.5 Registrazione messaggio
Per.effettuare.la.registrazione.di.un.messaggio.procedere.così:
1). Premere.e.mantenere.premuto.il.tasto.
SET/REC
.(
6
),.quidi.premere.
il.tasto.
MSG 1
.(
4
).(MSG.2.per.il.messaggio.2);.mantenere.questa.
situazione.finchè.sul.display.non.apparirà.il.carattere.“
E
”.(erase).
che. sta. ad. indicare. l’inizio. della. cancellazione. del. messaggio.
scelto..Una.volta.apparso.il.carattere.“E”.rilasciare.entrambi.i.tasti.
ed.attendere.che.si.illumini.il.punto.decimale.che.sta.ad.indicare.
l’inizio.della.registrazione.
2). Parlare.ad.una.distanza.di.10/20.centimetri.dal.microfono.situato.
sul.frontale.dell’apparecchio.con.volume.di.voce.medio.alto..
.
Una.volta.terminata.la.registrazione.premere.il.tasto.
VIS/STOP
..
.
Qualora.la.registrazione.superi.il.tempo.massimo.disponibile,.verrà..
interrotta.automaticamente.
3). É.possibile.scegliere.tra.due.qualità.di.registrazione,.normale.o.alta.
(vedi.Par..3.2.Impostazioni./.regolazioni.durante.il.funzionamento)..
Con. qualità. di. registrazione. alta. si. ottiene. una. registrazione. più.
fedele.a.scapito.però.di.una.riduzione.del.tempo.di.registrazione.
del.33%.circa.
É.possibile.registrare.il.messaggio.anche.dall’ingresso.ausiliario:.va.
ripetuta.la.sequenza.precedente.dopo.avere.impostato.‘AUX’..come.
sorgente.di.registrazione.su.(vedi.Par..3.2.
Impostazioni e regolazioni
)..
In.questo.caso,.andrà.regolato.-.utilizzando.il.trimmer.(
17
).-.anche.il.
livello.di.ingresso.AUX.per.ottenere.un.risultato.ottimale.
3.6 Riproduzione messaggio
Per.riprodurre.un.messaggio.registrato.in.precedenza.è.sufficiente,.a.
tasti.abilitati,.premere.il.relativo.tasto.(MSG.1.o.MSG.2).oppure.chiudere.
il.contatto.relativo.(contatto.M1:.MSG.1,.contatto.M2:.MSG.2).
3.3 Visualizzazione impostazioni
In.fase.di.funzionamento,.è.possibile.visualizzare.(senza.modificarli).
i. parametri. sopra. descritti. eseguendo. le. medesime. operazioni. ma.
sostituendo.il.tasto.
VIS/STOP
.(
7
).al.tasto.
SET/REC
.
3.4 Association of alarm tones/contact keys
The.
TONE 1
. to.
TONE C
. keys. (
8
). each. enable. one. of. the. twelve.
available.tones.to.be.reproduced..When.selecting.the.tones,.the.TONE.
1.key.corresponds.to.contact.1,.the.TONE.2.key.to.contact.2.and.so.on.
up.to.TONE.C,.which.corresponds.to.contact.12.
The.MSG.1.key.corresponds.to.contact.M1,.the.MSG.2.key.to.contact.
M2.
It.is.possible.to.associate.each.TONE.key.with.any.one.of.the.available.
tones.(see.the.reference.table.on.page.8)..To.set.these.associations,.
proceed.as.follows:
1). Enable. the. loudspeaker. and. adjust. the. loudspeaker. volume. to.
enable.the.tones.to.be.heard.properly..If.a.character.other.than.
a.hyphen.(“-”).is.shown.on.the.display,.press.the.VIS/STOP.key.
briefly.(the.character.“-”.will.appear).
2). Press.the.VIS/STOP.key.and.hold.it.down.(for.about.four.seconds).
until.the.hyphen.sign.(.“-”).starts.to.flash.
When.one.of.the.TONE.keys.is.pressed:.the.tone.currently.associated.
with.it.will.be.played.out..To.select.a.new.tone,.press.the.key.repeatedly.
until.the.required.tone.is.reproduced.by.the.loudspeaker..To.store.this.
new.association.between.the.key.and.the.tone,.simply.press.the.SET/
REC.key.(6)..
If.you.do.not.wish.to.store.the.new.association,.simply.press.the.VIS/
STOP.key.again:.this.will.cause.the.previous.associations.between.the.
keys.and.the.tones.to.be.restored.
3.5 Recording a message
To.record.a.message,.proceed.as.follows:
1). Press.the.
SET/REC
key.(
6
).and.hold.it.down..Then.press.the.
MSG
1
. key. (
4
). (MSG. 2. for. message. 2);. retain. this. situation. until. the.
letter.“E”.(Erase).appears.on.the.display.to.indicate.that.the.chosen.
message.has.started.to.be.deleted..
.
Once.the.letter.“E”.has.appeared,.release.both.keys.and.wait.for.
the.decimal.point.to.light.up,.showing.that.the.recording.has.started..
2). Speak.at.a.distance.of.10.to.20.centimetres.from.the.microphone.
on.the.front.panel.of.the.equipment,.at.a.medium.to.high.volume..
.
Once.the.recording.has.been.completed,.press.the
VIS/STOP
key..
If.the.length.of.the.recording.exceeds.the.available.time.limit,.it.will.
stop.automatically.
3). It.is.possible.to.choose.between.two.recording.qualities:.normal.
and. high. (see. point. 3.2. Settings. and. adjustments).. With. a. high.
quality,.the.recording.will.be.closer.to.the.original,.but.penalising.
the.recording.time.by.about.33%.
It.is.also.possible.to.record.a.message.via.the.auxiliary.input:.repeat.
the.sequence.indicated.above.after.setting.‘AUX’..as.the.source.of.the.
recording.(see.point.3.2.Settings.and.adjustments)..In.this.case,.it.will.
also.be.necessary.to.adjust.the.AUX.input.level.–.using.the.trimmer.
(
17
).–.so.as.to.achieve.the.optimum.result.
3.6 Playing out a message
To.play.out.a.message.recorded.earlier,.simply.press.the.associated.
key.(MSG.1.or.MSG.2).(with.the.keys.enabled).or.close.the.appropriate.
contact.(contact.M1:.MSG.1,.contact.M2:.MSG.2).
3.3 Displaying the settings
During. operation,. it. is. possible. to. display. the. parameters. described.
above.(without.altering.them),.carrying.out.the.same.procedures.but.
replacing.the.
VIS/STOP
.(
7
).key.with.the.
SET/REC
.key.
Summary of Contents for DAG9300
Page 11: ......