![Paso CMDS Series Instructions For Use Manual Download Page 12](http://html1.mh-extra.com/html/paso/cmds-series/cmds-series_instructions-for-use-manual_761614012.webp)
SERIE CMDS
12
4.3.1 Memorizzazione dei canali
Il sintonizzatore dispone di
10
posizioni di memoria per la banda
FM
e di
5
per la banda
AM
. Per memorizzare una stazione radio precedentemente
sintonizzata, occorre operare come segue:
1. Premere il tasto
ME
;
2. Premere il tasto
MEMORY
(
M1
,
M2
...) relativo al numero progressivo
che si vuole attribuire al programma.
Una volta memorizzata una stazione radio, comparirà, a lato della
frequenza visualizzata sul display, il numero della posizione di memoria ad
essa associata.
Per memorizzare i canali da
6
a
10
, occorrerà invece:
1. Premere il tasto
ME
;
2. Premere il tasto
SHIFT
;
3. Premere il tasto
MEMORY
(
M1
,
M2
...) relativo al numero progressivo
che si vuole attribuire (5 + 1...).
4.3.2 Richiamo dei canali memorizzati
Per richiamare una stazione memorizzata nei canali da
1
a
5
è sufficiente
premere il tasto relativo alla posizione desiderata; per richiamare una
stazione memorizzata nei canali da
6
a
10
è necessario invece far
precedere la pressione del tasto
MEMORY
da quella del tasto
SHIFT
.
POS. 1
POS. 3
POS. 6
POS. 10
4.3.1 Storing channels
The tuner has
10
storage cells for the
FM
band and
5
for the
AM
band.
To store a previously tuned radio station, you must proceed as follows:
1. Press the
ME
key;
2. Press the
MEMORY
key (
M1
,
M2
, etc. referred to the progressive
number you wish to assign to the program.
Once a radio station has been stored, the number of the memory cell
associated with it will appear next to the frequency shown on the display.
To store channels
6
to
10
, on the other hand, it is necessary to:
1. Press the
ME
key;
2. Press the
SHIFT
key;
3 Press the
MEMORY
key (
M1
,
M2
, etc. referred to the progressive
number you wish to assign (5 + 1...).
4.3.2 Calling up the stored channels
To call up one of the stations stored in channels
1
to
5
, it is sufficient to
press the key corresponding to the required position.
To call up one of the stations stored in channels
6
to
10
, on the other
hand, it is necessary to press the
SHIFT
key before pressing the
MEMORY
key.
USO DELL’APPARECCHIO
USING THE EQUIPMENT
4
11-626.pmd
06/10/2005, 15.40
12