Step No. 1 – Disconnect the tool from its air source.Grasp the finish nailer firmly with one hand and press the
rear of the handle and slide the magazine cover back towards you.
Step No. 2 – Insert the strip of 18 gauge brad nails with the point of the fastener facing down and place the point
of the fastener into the bottom of the magazine channel. Placing fasteners on the top of the magazine will cause
jamming.
Step No. 3 – Push the magazine firmly towards the front of the tool until it locks in place. Connect the air supply.
The tool is now ready to use.
.
INSTRUCTIONS FOR LOADING
5
orange magazine release button at the
Press release.
Disconnect air
Slide cover
