10
Problem Cause Solution
Inside diameter of ring
too large after clinching
Defective rings:
1. Wire too hard
2. Rough surface
3. Cut-off burrs
Return sample of rings to
your distributor to be tested
Wrong clinchers (021
、
022) Verify and replace clinchers
(021
、
022)
Inside diameter of ring
too small after clinching
Clinchers stops worn or
polished off (021
、
022)
Replace clinchers (021
、
022)
Tip of clinchers (021
、
022)
broken off
Replace clinchers (021
、
022)
Mismatched clinchers
(021
、
022): clinchers
(021
、
022) should be
replaced only in pairs
Verify and replace clinchers
(021
、
022)
Defective rings:
1. Points not equal
2. Ring not symmetrical
3. Cut-off Burrs
Return sample of rings to
your distributor to be tested
Helix in clinchers (021
、
022) worn so that it does
not properly guide the ring
point into the rotating helix
in opposite clincher
Replace clinchers (021
、
022)
Ring points not entering
opposite clincher
(021
、
022)
Rings only curling in one
clincher (021
、
022)
Replace clinchers (021
、
022)
。