9
Trouble shooting
Problem Cause Solution
Latch (014) worn
Replace latch (014)
Wrong latch used (014)
(too short)
Verify and replace latch
(014)
Latch spring broken (016) Replace latch spring (016)
Wrong piston rod (026)
(too short)
Verify and replace piston rod
(026)
Low power:
1. Air pressure set too low
2. Air leaks in supply hose
3. Air leak in tool
4. Throttle valve A(020)
not adjusted properly
Verify pressure:
1.Check air pressure setting
(Operator Manual)
2.Replace air supply hose
3.See page 15 and 16
4.Adjust throttle valve A
(020) properly
Wrong clinchers used
(021
、
022)
Verify and replace clinchers
(021
、
022)
Worn clinchers (021
、
022)
(helix, cam surface, bolt
holes, clincher bushings
(013))
Replace clinchers (021
、
022)
or clinchers bushing (013)
Worn rollers (025)
Replace rollers (025)
Inside diameter of ring
too large after clinching
Wrong rollers (025) (too
small)
Verify and replace rollers
(025)
