TRIMMASTER 16A ANGLED BRADDER MANUAL 8
7 TRIMMASTER 16A ANGLED BRADDER MANUAL
FUEL CELL LOADING PROCEDURE
1,000
shots
per
cell
Fuel cell
expiry
on base
of can
CORRECT FUEL CELL LOADING PROCEDURE
To open
- Push forward, lift then
back
Open fuel door assembly #33
Carefully align fuel adaptor and cell
stem
Raise fuel tube block assembly, will
lock in up position. Part #9 & 10
Open fuel door fully
Load fuel cell
To close
- Push forward then down
to lock fuel door
Note: Fuel Cell Dosing Lever must
be in the down position
Load
fuel
cell
6
5
7
7
1
2
3
4
ONLY USE PASLODE’S SPECIALLY FORMULATED FUEL, FAILURE TO DO SO MAY DAMAGE YOUR TOOL,
CAUSE MISFIRES AND VOID WARRANTY.
49°
ALWAYS REMOVE BATTERY,
FUEL CELL AND FASTENERS
WHEN SERVICING OR CLEARING A JAM.
8
CORRECT TOOL OPERATING PROCEDURES
= 50 brads per strip, 2 strips per load
1.6mm Smooth Shank
Lengths 32 to 63mm
Lost Tee Head
Zinc Plated & Stainless Steel
CORRECT NAIL LOADING PROCEDURE
Insert selected brads into magazine
Make sure top of head aligns with
Head supporting Brad Channel
Note: Brads are still behind follower
Depress follower lever #68
Pull bypass follower back past brad
strip to engage brads
Allow follower to rest behind brad
strip
Allow brad follower to rest behind
brad strip
1
2
3
4
5
6
7
