Step 13
With Motor Assembly tilted up, squeeze
4-5 drops of Paslode Lubricating Oil into
Sleeve (Area "A") and 3-4 drops onto
lower lip of Combustion Chamber (Area
"B") and apply 4-5 drops around the top
of the Combustion Chamber (area C).
Rotate Motor Assembly while oiling to
ensure oil is evenly distributed around
Sleeve and Combustion Chamber.
See Tool Cutaway Illustration on page 10.
Note: Do not over oil the tool.
Excessive oiling may cause staining of
work surface.
Step 14
Hold Motor Assembly upright, and push
down and release several times to allow oil
on lower lip of Combustion Chamber to be
evenly distributed.
8