This procedure provides a simple but
effective way to clean your Paslode
Cordless
tool and maintain reliable
operation. Regular cleaning and
lubrication will also extend part life and
provide maximum nail driving power.
To disassemble the tool for cleaning,
only a flat head screwdriver and the
9/64” Hex Key Wrench provided with
the tool are needed.
Paslode
®
recommends that an aerosol
“Tool
Cleaner", such as Paslode Tool
Cleaner (Part No. 219348), be used for
cleaning.
This cleaner is available
through your local Paslode Dealer.
If a different type of Degreaser Cleaner
is selected, make sure that it will not
damage
plastic and electrical parts.
Chemical damage to electrical parts may
result in the tool being
made inoperable.
To begin, you will need the
following items:
1. Flat Head Screwdriver
2. Hex Key Wrench (provided with tool)
3. Paslode Tool Cleaner #219348
4. Paslode Lubricating Oil #401482
5. Clean Lint Free Rag
DANGER
Remove all fasteners, fuel, and battery
prior to servicing the tool.
DANGER
Step 1
Use a flat head screwdriver to remove
the grill.
Step 2
Remove filter by hand and clean with
mild soap or replace if necessary.
2