8
Battery and Charging System
Inserting Battery
1.
Cordless
e
h
t
o
t
n
i ,
t
s
r
fi
s
t
c
a
t
n
o
c
,
y
r
e
tt
a
b
e
h
t
d
a
o
L
Brad nailer
2. Push battery fully forward into its locked Ready
position. The battery indicator light will light.
3.
NOTE: If battery is left in tool for an extended period,
the battery will discharge completely and will require
recharging.
Battery Indicator Light
On the right side of the handle is a small plastic lens. This is
the battery indicator light. When you insert a fully-charged
battery into the tool, you will see a blinking green light. If
the indicator light blinks red, recharge the battery.
BATTERY INDICATOR LIGHT
4. To remove
battery, push down on locking tab and
slide battery out.
To disengage the battery, push down on locking
tab and slide battery back until it locks into the
Standby position.
Ready
Position
Standby
Position
! ASSUME TOOL IS ALWAYS LOADED AND WILL ALWAYS FIRE A FASTENER.
! TOOL OPERATORS AND BYSTANDERS MUST WEAR EYE AND HEARING PROTECTION THAT CONFORMS TO ANSI
STANDARDS.
! READ MANUAL FROM COVER TO COVER. DISREGARDING WARNINGS COULD
RESULT IN ACCIDENTS.
! EXPLOSION HAZARD - NEVER USE IN EXPLOSIVE ATMOSPHERE - TOOL EXHAUST COULD IGNITE FUMES.
! CARBON MONOXIDE HAZARD - USE ONLY IN VENTILATED AREA TO AVOID NAUSEA AND UNCONSCIOUSNESS.
! KEEP FINGERS AWAY FROM TRIGGER. NEVER POINT TOOL AT ANYONE OR YOURSELF.
! ASSUME TOOL IS ALWAYS LOADED AND WILL ALWAYS FIRE A FASTENER.
! TOOL OPERATORS AND BYSTANDERS MUST WEAR EYE AND HEARING PROTECTION THAT CONFORMS TO ANSI
STANDARDS.
! READ MANUAL FROM COVER TO COVER. DISREGARDING WARNINGS COULD
RESULT IN ACCIDENTS.
! EXPLOSION HAZARD - NEVER USE IN EXPLOSIVE ATMOSPHERE - TOOL EXHAUST COULD IGNITE FUMES.
! CARBON MONOXIDE HAZARD - USE ONLY IN VENTILATED AREA TO AVOID NAUSEA AND UNCONSCIOUSNESS.
! KEEP FINGERS AWAY FROM TRIGGER. NEVER POINT TOOL AT ANYONE OR YOURSELF.