![background image](http://html.mh-extra.com/html/paslode/im200-f18/im200-f18_operating-manual_761514009.webp)
8
Battery and Charging System
Inserting Battery
1.
Load the battery, contacts first, into the TrimMaster 18
™
Finish nailer.
2.
Push battery fully forward into its locked position.
3.
To remove battery, push down on locking tab and slide
battery out.
NOTE: If battery is left in tool for an extended period, the
battery will discharge completely and will require recharging.
IMPORTANT: Should your battery terminals become
corroded and cause poor electrical contact, clean the
terminals using a soft cloth.
Battery Indicator Light
On the right side of the handle is a small plastic lens. This
is the battery indicator light. When you insert a fully-charged
battery into the tool, you will see a blinking green light. If the
indicator light blinks red, recharge the battery.
BATTERY INDICATOR LIGHT
Clean the
contacts
P
P