PASIAN Flora, User Manual

Page: 21 / 48

USER MANUAL
IGNITION FAILURE ALARM
If the ignition of combustion is not detected, the display will show "AL 5 NO IGNITION".
To deactivate the alarm state, press the SET button (4) for a long time (approx. 2
seconds). The alarm stops and the stove first returns to the "FINAL CLEANING" state
and then to "OFF".
Before starting a new ignition cycle, the causes must be checked:
• Check that the tank is full
•
Check that the brazier is in the correct position
Then, remove the unburned fuel from the burner.
ATTENTION: An excessive quantity of fuel in the b urne r, a wet fuel or a dirty brazier
make the ignition phase difficult. In the presence of these critical conditions, a dense
white smoke can form, capable of causing an explosion in the combustion chamber,
such as to shatter the glass.
Warning: never stand in front of the stove during the ignition phase if the fuel releases
dense smoke.
S tove is equipped with all the safety systems necessary to minimize the risk of
glass breaking.
Attenton: If the appliance does not turn on regularly, the main cause
may derive from insufficient maintenance or poor quality of the fuel
used.
Clean as explained in the dedicated chapter.
20