Release date: 09.12.17
rev 1.0 17
4 / 4
FIREWALL
PROGRAMMING
30 m
WORKING MODE SETTINGS AND BLACK WIRE POLARITY
For the management of the different activation/deactivation functions of Firewall OBD2, please press 5 times the button of the module
ORANGE flashes of the module’s led represents the option number, RED flashes the status of the option.
To scroll options press quickly the button of the module.
To change option status press the button 5 seconds.
The number of ORANGE flashes of the module LED represents the displayed number of the option and the RED flashes indicate the status of the option.
WARNING: if for 30 seconds you do not press any remote control buttons, the system exits from the programming mode automatically.
LED ORANGE OPTION NUMBER
LED RED STATE 1
LED RED STATE 2
LED RED STATE 3
LED RED STATE 4
1 FLASH ORANGE
1 FLASH RED
2 FLASHES RED
3 FLASHES RED
4 FLASHES RED
WORKING MORE
THROUGH WIRE GND OR
12VDC
THROUGH REMOTE CONTROL
WITH BUZZER ALERT IF WIRE TO
IGNITION
THORUGH REMOTE
CONTROL AND WIRE
THORUGH REMOTE CON-
TROL AND WIRE WITH 3
IMPULSES
2 FLASHES ORANGE
1 FLASH RED
2 FLASHES RED
ACTIVATION WIRE POLARITY
GND POLARITY
12 VDC POLARITY
x5
WARRANTY CONDITIONS
THIS PRODUCT IS GUARANTEED 2 YEARS FOR ANY MANUFACTURING DEFECT. THE WARRANTY IS VALID ONLY WITH THE PURCHASE INVOICE
RESET
The module can be supplied with a remote control for the activation/deactivation of the OBD2 port.
In case you need to erase the remote control memory, please press 3 times the Firewall OBD2 button until the LED will become ORANGE, then press the
button till the LED lights GREEN. The memory is erased.
Firewall OBD2 can work in different modes.
Each kit independently as it is set up, properly reprogrammed can operate in a different mode than the default one.
Here below the description of the different settings.
REMOTE CONTROL
PROGRAMMING
To program a new remote control it’s necessary that the module is OFF with LED GREEN, now please press 3 times the Firewall button: the LED will light
ORANGE.
Please press the button again LED begins to flash ORANGE:
Then, please press one remote control buttons: the LED will become GREEN . Remote control is memorized.
x3
x3
Press till the
LED is GREEN
x1
