background image

  X p l o r e r   G L X   U s e r s ’   G u i d e

25

Print 

If there is a printer connected to the GLX, select Print from the Graphs 

menu to print the currently displayed graph page.

Print All 

Select Print All to print all of the graph pages.

For more information, see “Printing” on page 91.

Delete Graph Page 

This option is available when two or more graph pages 

exist. When you select Delete Graph Page from the Graphs menu, the currently 
displayed page is deleted and the next page appears. (If there is no next page, the 
previous page appears.)

Data Annotation

The GLX’s data-annotation capability allows you to attach notes to data points in 
the Graph display. You can add these notes while you are viewing the Graph 
either during or after data collection.

13

 A note (represented by a flag icon: 

) can 

include a text message, an audio recording of your voice, or both; it can also be 
“empty” (not containing text or audio).

Data with notes

There are two ways to attach a note to a data point in the Graph display: 

Press 

 quickly to mark a data point with an icon (

) representing an 

empty note. You can later add text and audio to this note.

Press and hold 

 and begin speaking to mark a point and immediately 

record an audio message. When you are finished speaking, release 

.

14

In both cases, the note is added at the location of the Data Cursor.

15

See page 16 for instructions on moving the Data Cursor. If you are adding 
notes during data collection, it is often convenient to have the cursor tracking 
the data so that notes are always attached to the most recently collected 
point; press the down arrow key to make the cursor track the data.

After you have added a note, you can access its audio and text by positioning the 
Data Cursor on it.

13

In order to add a note 

during

 data col-

lection, the GLX must be in Continuous 
Sampling mode (its default mode), rather 
than Manual Sampling mode. See 
page 57 for more information.

14

The GLX cannot record audio for a 

data note when the microphone is con-
figured as a sound sensor or sound level 
sensor. See page 58 for more informa-
tion.

15

The Data cursor must be turned on 

(see page 22) in order to use data anno-
tation.

Summary of Contents for Xplorer GLX

























































































































































Reviews: