PASCO Spark SLS User Manual Download Page 29

Page: 29 / 124

5 Data display

Displaying data in a line graph

Showing and hiding the line graph tool palette

To show the tool palette, touch the blue Graph Tools button near the lower left corner of
the graph.

To hide the tool palette, touch the orange Graph Tools button.

Adjusting the scale of a line graph

Do one or more of the following tasks (in any order) to change the range and domain of a
graph.

Scaling a graph to fit all data

Scaling by direct manipulation

Scaling a graph to fit all data

1. Touch the Graph Tools button to open the tool palette.

2. Touch the Scale-to-fit button.

The graph adjusts to fit all data (or all highlighted data).

Scaling by direct manipulation

Complete one or more of these steps in any order:

012-10616E

Summary of Contents for Spark SLS





























































































































Search results

Summary of Contents for Spark SLS

Reviews:

Related manuals for Spark SLS

Brands by name

Popular brands

PASCO Spark SLS, User Manual

Search results

Summary of Contents for Spark SLS

Reviews:

Related manuals for Spark SLS

Brands by name

Popular brands