![background image](http://html.mh-extra.com/html/pasco/spark-sls/spark-sls_user-manual_761332018.webp)
3 Setting up an experiment
Customizing data collection
1. Touch the Sampling Options button.
The Sampling Options screen opens.
2. Touch Periodic.
3. Touch OK.
Putting SPARK into manual sampling mode
In manual sampling mode, a single value from each measurement is recorded each time you
manually trigger SPARK. Complete these steps to put SPARK into manual sampling mode:
1. Touch the Sampling Options button.
The Sampling Options screen opens.
2. Touch Manual.
3. Touch OK.
Setting an automatic stop condition
When a stop condition is set, SPARK SLS automatically stops recording data after a set time
interval. Complete these steps to set a stop condition:
1. Touch the Sampling Options button.
The Sampling Options screen opens.
2. Under Automatic Stop Condition, touch the Condition: box and touch Stop after duration.
3. Touch the Value: box and enter a time value.
4. Touch the Units: box and touch units of time.
5. Touch OK.
012-10616E
9