![background image](http://html1.mh-extra.com/html/pasco/se-9654/se-9654_instruction-manual_3933139029.webp)
Zeeman Effect Experiment
Setup the Data Displays in Capstone
27
012-14266B
•
The workbook page should appear as below.
Setup the Calculations
14. Click the “Calculator” button (
) on the left Tools palette to open the Calculator window.
15. Type in rows 1, 2, 3 and 5 exactly as shown below. Subscripts (or superscripts) are done by right clicking (or control-
click) the mouse and using the “Insert Subscript” pop-up. NOTE: You can also get Greek characters this way.
16. Type in row 4. Note that instead of typing in the quantities as shown in the square brackets, you must
select
them from the
“Calculator” list that pops up when you click the multi-colored triangle ( ) below the calculator to the left.
•
The [k] and [Radius] are under “User-Entered Data” in the Calculator list.
•
The term [R
0
] is under “Constants” and then “User-Defined Constants”.
•
You may type the exponents or use the x
2
button in the Scientific keypad.
Figure 26: Workbook page with table columns labeled
Figure 27: Calculations 1 through 5
Figure 28: User-Defined Data