![background image](http://html1.mh-extra.com/html/pasco/se-9654/se-9654_instruction-manual_3933139028.webp)
SE-9654
Zeeman Effect Experiment
26
012-14266B
•
The workbook page with three table displays should appear as below.
Label the First Two Columns of Each Table
8. Click “Select Measurement” at the top of column 1 in Table 1. Click “Create New” and select “User-Entered Data” from
the menu.
•
“User Data 1” will appear highlighted at the top of column 1.
9. Type “k” and press Enter. The term “units” is now highlighted. Since “k” is unit less, press Delete or Backspace. If you
make a mistake in the label, click on it and select Rename. In the cells below the column heading, type in the values for k
for the circles you measured with B = 0. For example 4, 3, 2 and 1.)
10. Click “Select Measurement” at the top of column 2 in Table 1. Click “Create New” and select “User-Entered Data” from
the menu.
•
“User Data 2” will appear highlighted at the top of column 2.
11. Type “Radius” and press Enter. The term “units” is now highlighted. Type “m”.
12. DO NOT do column 3 yet!
13. Use the same procedure to label the first two columns in Table 2 as “R+” and “R-”, with the units “m”, and the first two
columns in Table 3 as “R plus” and “R minus” with the units “m”.
Figure 24: Workbook page with three table displays
Figure 25: Select “User-Entered Data