Assembly instructions
Step 1: Assemble the base
Insert the tower into the base. The deeper it is the less chance of
wobble when the blades rotate at high RPMs. Wobbling may
occur, especially with the larger blades, but will settle down after
a few seconds.
Step 2: Assemble the nacelle
1. Connect the nacelle front into the nacelle base using the long
screws and nuts.
2. Connect the DC Motor Stand to the nacelle base.
Step 3: Assemble the generator
1. Connect the nacelle to the tower.
2. Using the small screws and nuts, connect the DC motor using
the motor clip to the motor stand.
Step 4: Assemble the blades
1. Place the blades in the hub with the blade leaf facing forward
and sandwich them together.
2. Compress the pieces together with your fingers and insert the
shaft.
3. Use the wing nut to compress the blade assembly.
4. Connect the nose cone.
2 | Renewable Energy Kit • SE-7611
