®
M o d e l N o . P S - 2 0 0 5
U s i n g t h e P A S P O R T A i r L i n k S I w i t h a C o m p u t e r
3
•
Mac OS X 10.3
There are two parts to the setup.
1.
Part 1: Bluetooth Setup Assistant
•
Run the Bluetooth
Setup Assistant utility
program. In the ‘Select
Device Type’ window,
select ‘Other Device’.
When the ID# of the
AirLink SI appears in
the ‘Bluetooth Device
Set Up’ list, select it
and click Continue.
•
Enter
1234
as the passkey. Click Continue until you reach
the Conclusion screen, and then click Quit.
2.
Part 2: Bluetooth Serial Utility
•
Run the Bluetooth Serial Utility program. Click ‘New’ in
the ‘Bluetooth Serial Ports’ window to create a serial port
and use the following settings:
•
Enter ‘IPSI-xxxxx’
for the port name
(where xxxxx is the
ID number on the
back of your
PASPORT AirLink
SI). Click ‘Select
Device’.
•
In ‘Select Bluetooth Device’, select the PASPORT Air-
Link SI by its ID number and select ‘Sensor’. Click the
‘Select’ button to return to the previous window.
•
Select ‘RS-232’ for the Port type and click OK.
Windows XP (SP2) with Default Win XP Drivers
Open the Bluetooth Devices Control Panel to add the
PASPORT AirLink SI.
•
Under the ‘Devices’ tab, click ‘Add’ to open the ‘Add
Bluetooth Device Wizard’. Click the checkbox for ‘My
device is set up and ready to be found’, and then click
‘Next’.
•
Select the AirLink SI
from the list of Blue-
tooth devices and click
‘Next’. When the
Device Wizard asks
for a passkey, enter
1234
.
•
When the ‘Add
Bluetooth Device
Wizard’ is fin-
ished, make a note
of the Outgoing
COM port num-
ber for the Air-
Link SI. You will
need to enter the
COM port num-
ber in the Data-
Studio ‘Choose Interface’ dialog (see below).
Windows XP (SP2) with the Toshiba Driver
For some PC’s with Windows XP and built-in Bluetooth capa-
bility, a proprietary Toshiba Bluetooth driver (or ‘stack’) can
provide support. The CD with the USB Bluetooth Adapter
available from PASCO includes the Toshiba driver. Follow the
instructions that came with the CD to install the software.
Connect the USB Bluetooth adapter to the computer. Open the
Bluetooth Manager (e.g., double-click its icon in the Task
Tray).
•
The ‘Add New Connec-
tion Wizard’ will open.
Choose ‘Express Mode
(Recommended)’ and
click ‘Next’.
•
In the ‘Select a device’
window, choose the
AirLink SI that is iden-
tified by its ID# and
click ‘Next’.
•
The ‘COM port setting’ window opens. Make a note of
the COM port number. You will need to enter it in Data-
Studio. Click ‘Next’ until you reach the ‘Completing the
Add New Connection Wizard’ window and click ‘Finish’.
•
The Bluetooth Settings
window opens. Select
your AirLink SI in the
window. Click the ‘Blue-
tooth’ menu and select
‘Connect’.
•
The icon in the Bluetooth
Settings window changes
to show that the AirLink
SI is connected. Exit the
Bluetooth Settings window.