PAScar/GOcar Accessories
012-07672A
2
Attaching the Magnetic Bumper Accessory to
the PAScar Model ME-6950
1. Slide Magnetic Bumper Accessory over the
PAScar plunger, pressing the plunger in after
accessory is in place. Velcro pads on the accessory
should align with the Velcro pads on the PAScar.
The hooks on the accessory slide into the two small
holes on the front bumper of the car (see Figure 1).
I
nserting the Friction Accessory Screw into the
PAScar or GOcar
1. Hold the PAScar/GOcar upside down, such that the
underside of the car is facing up.
2. Insert the threaded rod into the center hole on
the bottom of the car. Rotate the screw
clockwise until the foot pad rests against the
plastic frame (see Figure 2).
Limited Warranty
PASCO scientific warrants the product to be free
from defects in materials and workmanship for a
period of one year from the date of shipment to the
customer. PASCO will repair or replace, at its
option, any part of the product which is deemed to
be defective in material or workmanship. The
warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a
manufacturing defect or improper use by the
customer shall be made solely by PASCO
scientific. Responsibility for the return of
equipment for warranty repair belongs to the
customer. Equipment must be properly packed to
prevent damage and shipped postage or freight
prepaid. (Damage caused by improper packing of
the equipment for return shipment will not be
covered by the warranty.) Shipping costs for
returning the equipment after repair will be paid by
PASCO scientific.
Address:
PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
1-800-772-8700 (inside the U.S.) or
(916) 786-3800
FAX:
(916) 786-3292
e-mail:
Web site:
www.pasco.com
The exclamation point within an
equilateral triangle is intended to alert the
user of important operating and safety
instructions that will help prevent damage
to the equipment or injury to the user.
Figure 2: Placement of the
Friction Accessory Screw
PAScar
Footpad
Figure 1: Placement of the
Magnetic Bumper
Front bumper
Magnetic Bumper
Accessory
NOTE:
The metal rod on the screw will protrude out
from the top side of the PAScar or GOcar. To
remove the screw, turn the foot pad counterclockwise
to loosen the thread and pull out.
Plunger