Components
Components
1
2
3
Install the batteries
Install the batteries
The Smart Fan Accessory requires four AA batteries. Use either
alkaline (included) or rechargeable batteries.
1. Remove the battery cover from the end of the Smart Fan
Accessory. Press the sides of the cover and pull away from the
accessory.
2. Insert four AA batteries into the battery compartment. Insert the
positive (+) end of the battery into the section that does not have
a spring.
3. Place the battery cover back on the accessory and press until it
clicks into place. Make sure that the springs on the cover are
aligned with the negative ends of the batteries.
A
Attach t
ttach to a car
o a cartt
The Smart Fan Accessory attaches to the rails of the cart accessory
tray.
1. Position the fan over the cart so that the fan points toward the
rear of the cart.
2. Place the fan over the rails of the cart accessory tray. Press down
until the fan snaps into place.
3. If using a Smart Cart, connect the Smart Cart Accessory Cable to
the ports on the fan and the cart.
Contr
Control the fan thrust (manual mode)
ol the fan thrust (manual mode)
Set the fan thrust at three different levels using the power button.
1. Press the power button to turn on the fan.
2. Press the power button again to change the fan thrust. Three
different thrust levels are available.
3. Press and hold the power button to turn off the fan.
Power Button
Power Button
Press to turn on the fan. Press again to change the fan speed.
Press and hold to turn off the fan.
1
Battery Cover
Battery Cover
Press the sides of the cover and pull away from the accessory to
access the battery compartment.
2
Smart Cart Port
Smart Cart Port
Use with the Smart Cart accessory cable to connect the fan to a
Smart Cart.
3
Smart Fan Accessory | ME-1242
Product Guide
2
012-15552B