EM-3533
Wireless AC/DC Module
012-16455A
Components
1 Micro USB port
For connecting the included USB cable to a USB
charger or USB port.
5 Clip holder
For inserting a jumper clip to electrically connect
modules.
2 Power button
Press and hold to turn the power on or off.
6 Peg
Insert into a notch of another module to physically
connect modules.
3 Bluetooth status LED
Red blink
Ready to be paired with software.
Green blink Paired with software.
Yellow blink Remotely logging data.
7 Notch
Insert over a peg of another module to physically
connect modules.
4 Battery status LED
Red blink
Battery needs to be recharged soon.
Green solid Battery is fully charged.
Yellow solid Battery is charging.
Getting Started
Before using the device with students for the first time,
perform the following tasks:
1. Charge the battery.
2. Update your PASCO data collection software.
3. Update the firmware.
To charge the battery
1. Connect the USB cable to the USB port on the
device. Connect the other end of the cable to a
USB charger or port.
2. Allow the battery to charge for at least three
hours. The battery status LED will turn green
when fully charged.
Charging automatically stops when the battery is fully
charged. The device can remain connected to a power
source when fully charged without damaging the battery.