®
Model No. CI-6538
Rotary Motion Sensor
31
Appendix B: Calibration of the Rotary
Motion Sensor
Calibration of the CI-6538
ScienceWorkshop
® Rotary Motion Sensor
is not required. However, you can zero the CI-6538 Rotary Motion
Sensor as follows:
1.
Connect a
ScienceWorkshop
Rotary Motion Sensor and set the sensor
to the zero position (See the instruction sheet or experiment guide
provided with your Rotary Motion Sensor for instructions.)
2.
With your mouse, associate the Rotary Motion Sensor icon to the
interface in the Experiment Setup window.
3.
In the Experiment Setup window, double click on the Rotary
Motion Sensor icon.
4.
From the Linear Calibration menu, select the appropriate choice
and click the
OK
button. When you press the
Start
button,
DataStudio automatically zeroes the Rotary Motion Sensor at the
position you set in step 1.