Parweld XR935H, Instruction Manual

Page: 3 / 37

XR935H -
Everyday Light Reactive Welding and Grinding Helmet
- ENGLISH
3
TECHNICAL SPECIFICATIONS
Viewing Area 100 x 41mm (3.93” x 1.62”)
Cartridge Size 110 x 90 x 8mm (4.33” x 3.54” x 0.31”)
UV/IR Protection Permanent DIN Shade 16
Light State DIN Shade 4
Dark State DIN Shade 9 to 13 Variable
Power Supply Solar Cell with Built-in Battery
Power On/Off Fully Automatic
Switching Time Light to Dark <1/30,000s
Dark to Light 0.1 - 1.0s (Internal Variable)
Operating Temperature -10ºC to +60ºC
Storage Temperature -20ºC to +70ºC
Helmet Material High Impact Polyamide Nylon
Total Weight 460g
Minimum Operating Amperage 10 Amps
DO
Ensure the front cover lens is fi tted before use and remove protective fi lm.
Ensure that the lens is clean and there is no dirt or spatter covering the 2 sensors at the front of the fi lter.
Inspect all parts for signs of wear or damage. Any scratched or cracked parts should be replaced prior to
use.
DON’T
Never place the helmet on a hot surface.
Never open or tamper with the fi lter cartridge.
OPERATION
1. ADJUST THE WELDING HELMET ACCORDING
TO INDIVIDUAL REQUIREMENTS
The headband should be adjusted both in diameter and height.
The angle between face and helmet should be
adjusted and is recommended to be
10° - 12°.
2. ON/OFF
The solar unit automatically switches on when
exposed to light.
10˚-12˚