Partner SP-850-S, Service Manual

Page: 23 / 61

23
Soft-Off by PWR-BTTN
Under ACPI (Advanced Configuration and Power management Interface) you can create a software
power down. In a software power down, the system can be resumed by Wake Up Alarms. This
item lets you install a software power down that is controlled by the normal power button on your
system. If the item is set to Instant-Off, then the power button causes a software power down. If
the item is set to Delay 4 Sec. then you have to hold the power button down for four seconds to
cause a software power down.
Restore AC Power Loss
This item sets the system status after restore on AC power loss.
PME Wake up from S5
This feature allows the system wakeup on PME (Power Management Event).
Wake system with Fixed Time
This function is for setting the Date and Time for your computer to boot up. When enabled, more
options will appear for you to specific the Date and Time.
Power Button
This item allows you to enable or disable the power button.
Super IO Configuration
Touch control
This item allows you to enable or disable the touch controller.
CHASIS OPEN
This function allows you to enable or disable case open detection.