manualshive.com logo in svg

Partner SP-800, Service Manual

Share
Download
Partner SP-800 Service Manual Download Page 5

iii

TABLE OF CONTENTS

CHAPTER 1 GETTING STARTED ................................................ 1

Unpacking the machine .................................................................................1

Identifying components  .................................................................................2

CHAPTER 2 BIOS SETUP ............................................................ 5

About the Setup Utility ...................................................................................5

Entering the Setup Utility  ..........................................................................6

BIOS navigation keys ................................................................................6

Using BIOS  ...............................................................................................7

Main Screen ...................................................................................................8

Advanced Settings .........................................................................................9

IDE Configuration

 ....................................................................................10

Primary/ Secondary IDE Master ..............................................................11

MPS Configuration

 ...................................................................................12

SuperIO Configuration

 .............................................................................13

Hardware Health Configuration

 ...............................................................14

ACPI Configuration

 ..................................................................................15

USB Configuration

 ...................................................................................16

Boot Settings Configuration

 .........................................................................17

Boot Device Priority .................................................................................18

Hard Disk Drives ......................................................................................19

Boot Settings Configuration

 .....................................................................20

Chipset Settings ...........................................................................................21

North Bridge Chipset Configuration

 .........................................................22

South Bridge Chipset Configuration

 ........................................................23

Security Settings ..........................................................................................24

Exit Menu .....................................................................................................25

CHAPTER 3 INSTALLING DRIVERS AND SOFTWARE ............ 27 

Driver auto installation..................................................................................27

Intel Chipset Driver.......................................................................................28

Intel Chipset Graphics Driver .......................................................................30

LAN Driver ....................................................................................................32

Touch Screen Driver.....................................................................................34

Calibrating the touchscreen .....................................................................37

Summary of Contents for SP-800







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands