Introduction 51
Introduction
z
Min./Max. Code Length (Set value)
A Minimum and Maximum length ranging from 1 to 48 can be set to qualify
data entry. The length is defined to be the actual barcode data length sent.
Label with length exceeds these limits will be rejected. Make sure that the
Minimum length setting is no greater than the Maximum length setting, or all
the labels of the symbology will not be read. In particular, you can set the
same value for both Minimum and Maximum reading length to force the fixed
length barcode decoded. The values of setting cannot effect in some fixed
length labels of symbology (i.e. UPC/EAN/JAN call WPC).
z
Add-On Lock with WPC
The Add-On barcode is the supplemental code and often presents the 2 or 5
supplement digits with WPC. The feature will force output the Add-On code
together in reading WPC with Add-On symbology barcode if Add-On Lock is
enabled. Therefore it cannot read the WPC barcode without Add-On. It is
recommended to program the Add-On to be enabled while the Add-On code
must be read out.
z
Expansion Function
The expansion of function is used only for UPC-E and EAN-8 code reading, It
can extend to 13-digit with leading "0" numeric system when the feature is
enabled.
z
Truncate Leading Zeroes
The leading "0" digits of barcode data characters can be truncated when the
function is enabled. The feature is used only for WPC code reading.
z
ISBN/ISSN Translation
The ISBN (International Standard Book Number and ISSN (International
Standard Serial Number) are two kinds of barcode bookland label. The ISBN
is a 10 digits with leading "978" and the ISSN is a 8 digits with leading "977" of
the "EAN-13" symbology code.
z
Truncate Leading/Ending Digits (Set value)
The leading or ending digits of barcode data characters can be truncated
when the values of setting are not zero. It will be read nothing else only beeps
when the truncate value is more than barcode data digits or the value of
Truncate Leading is overlap with the Ending. The maximum value of truncate
digits is 15.
z
Code ID (Set ASCII Code)
A Code ID is a character that is used to represent the symbol begin decoded
upon succeeding reading. The Code ID is prefixed to the data begin or tail
transmitted if the feature is selected. There are some labels of symboolgy (i.e.
UPC-E and EAN-8) include 2 Code IDs.
z
Full ASCII for Code-39 Format
The full ASCII Code-39 symbology is an enhanced set of Code-39 that is the
data with total of 128 characters to represent full ASCII code.
Summary of Contents for SD-730N
