-------------Thermal Printer-------------
23
Models other than the Simplified Chinese model: n=0
ESC S (*)
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[
Details]
·
This command is effective only in page mode.
·
Data buffered in page mode are cleared.
·
This command sets the print position to beginning of the line.
·
The printing area set by E
SC W
are initialized.
·
This command switches the settings for the following commands (in which the values
can be set independently in standard mode and page mode) to those for standard mode:
①
Set right-side character spacing:
ESC SP, FS S
②
Select default line spacing:
ESC 2, ESC 3
·
The following commands are enabled only to set in standard mode.
①
Set printing area in page mode:
ESC W
②
Select print direction in page mode:
ESC T
·
The following commands are ignored in standard mode.
①
Set absolute vertical print position in page mode:
GS $
②
Select relative print position in page mode:
GS\
·
Standard mode is selected automatically when power is turned on, the printer is reset,
or command
ESC @
is used.
[Reference]
FF, ESC FF, ESC L
ESC T n (*)
[Name] Select print direction in page mode
[Format] ASCII ESC T n
Hex 1B 54 n
Decimal 27 84 n
[Range] 0
≤ n ≤ 3
48
≤ n ≤ 51
[Description] Selects the print direction and starting position in page mode.
n specifies the print direction and starting position as follows:
n
Print Direction
Starting Position
0, 48
Left right
Upper right
1, 49
Bottom to top
Lower right
2, 50
Right to left
Lower right
3, 51
Top to bottom
Upper right
[Details] ·When the command is input in standard mode, the printer executes only internal flag
operation. This command does not affect printing is standard mode.
·
This command sets the position where data is buffered within the printing area set by
ESC W
.
·
Parameters for horizontal or vertical motion units ( x or y ) differ as follows, depending on
the starting position of the printing area:
