10
Safety Instructions
This product is TUV, CB and UL approved.
Note
:
Do not ingest the liquid crystal from a broken LCD. If your skin comes into contact with liquid
crystal, wash it with soap immediately.
Please observe the installation instructions before connecting the
LM12 series
to any device.
Due to some high voltage components, it is advisable to not open the unit, as it may cause
severe electrical shock or burns. All repair work for the device should be sent to a qualified
service center.
Do not operate the device without the enclosure. Make sure no objects or liquids get into the
interior through openings in the housing.
11
Further Notices
The
LM12 series
monitor is subject to a continuous process of improvement. For this reason
we reserve the rights to make any technical modifications.
We point out that inadequate handling, storage, influence and/or modification can cause
disturbances and damage in usage.
In case you modify the product in any way we do not assume warranty and liability unless you
have an explicit release in writing for your specific case. This applies especially to
unprofessional repair and maintenance jobs.
Any claims for damages against the manufacturer of the
LM12
no matter for which legal
reasons are excluded if no intention and gross negligence can be proved. Above limitations do
not apply to claims for damages out of the product liability law.
This Operator's Manual is exclusively written for the
LM12 series
monitor.
12
Warranty
The manufacturer of the
LM12 series
monitor guarantees that all products supplied are free
from production and material defects. The
LM12 series
monitor carries a 1 year warranty on all
parts .
13
Statement of Confirmation
This is to certify that statements of confirmation are available for all different variations of the
LM12 series
monitor.
You can order them directly from your distributor stating the exact monitor type.
(see model number label on the bottom of the device)
