13
6
Driver Installation
6.1 Touchscreen
Important Note:
The
LM-12 series
monitor
with touch capability contains an integrated AccuTouch serial
controller (E271-2210) communicating at 9600 baud. Normally this is recognized by the
setup utility. If not, the adjustment can be made manually by restarting the setup utility. Due
to the different video card signals, it may be necessary to re-calibrate the touchscreen each
time the
LM-12
is moved to other systems.
Detailed installation instructions are located in the file:
D:\TOUCH\ELO\README.TXT
6.2 Magnetic Card Reader Setup
The setup utility can be found on the installation CD at:
D:\MSR\SETUP.EXE
(Drive
D:\
shown above may vary on each system.)
6.3 Diagnostics Utility
The diagnostic program COMDUMP is located in the path D:\TOUCH\ and must be used in
DOS or command prompt mode.
Usage:
COMDUMP <number of COM port 1 or 2> [baud rate]
(Baud rate is optional).
COMDUMP will display data from the touchscreen to the selected COM port in hex format.
7
Maintenance and Care
Before cleaning, unplug the main power. For cleaning the housing, use a soft cloth moistened
with a mild cleaning agent. Please make sure that no liquid is running over the rear side into
the housing.
