There is a Layer LED next to the Num Lock LED, it shows the layer
status. LAYER 1 - LED OFF, LAYER 2 - LED Yellow, LAYER 3 - LED Orange.
1.2 Keylock Function
If the keyboard is with KEYLOCK (KB1141), you can define the keylock
function ON or OFF.
If the keylock function is ON, you can define the key code for each
keylock position. When the key is turned to the OFF position, the
keyboard is locked.
There are two optional function of the keylock.
A. LOCK RESET
B. Lock re
the other is changing layer by keylock.
If you set LOCK RESET function ON, every time when the keyboard is
power ON, the keyboard will not operate until the key is firstly
turned to the OFF position and then turned to any other lock
position.
When the Lock Reset function is off, this function will be disabled.
If you set LAYER LOCK function ON, you can assign each keylock
position a layer number. When the key is turned, the layer will
change to the layer number of that position.
When you disable one layer which is already assigned to one lock
position, the layer number of that lock position will be changed
to another enable layer. For example, if lock position 4 is
assigned to layer 3, and then if you disable layer 3, the layer
of lock position 4 will be changed to layer 1 or 2, depends on
which layer is enable.
To set KEY LOCK function, see section 2.8
To Define key code for each lock position, see setion 2.7
1.3 Country Setting
You can configure the programming utility for the language of the
following country :
US, UK, FRANCE, GERMANY, SPAIN, ITALY
See section 2.8
1.4 Default Key
The keys listed below are not the standard keys on the keyboard KB114.
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PrintScrn,
ScrollLock, Pause, Insert, Home, PageUp, Delete, End, PageDown
If you want to use these keys, you should program them on the upper
28 programmable keys by the programming utility. On doing that, you
may need a standard PC keyboard or use the function DEFAULT KEY.
If you want to use the standard PC keyboard to invoke the programming
utility, connect the keyboard into the pass through keyboard port of
the programmable keyboard.
Or you can simply use the standard keys of the programmable keyboard.
In the utility, select menu EDIT and select item DEFAULT KEY, the
default key table is shown below and the upper 28 keys of the keyboard
is forced to be the default key in each layer. Select the DEFAULT KEY
again to turn off the function.
1.5 List of Files On the Diskette and Their Purpose
