Partner 1750 Operator'S Manual Download Page 3

ENGLISH

3

Symbols 2

Important! Read before using chain saw  

2

Contents 3

EC declaration of conformity 

3

Technical speci

fi

 cations 

4

Chain saw parts 

5

Safe use 

5

Starting and stopping 

7

Daily inspection and maintenance  

7

Kickback prevention 

8

Chain brake with kickback guard 

9

  - Kickback guard inspection 

9

  - Manual chain brake function check 

9

  - Inertia chain brake function check 

9

Mounting guide bar and adjusting chain 

10

Chain catcher 

11

Right hand guard 

11

CONTENTS

Slip clutch 

11

Electronic overload protection 1950W 

11

Cutting equipment 

11

Chain and guide bar lubrication 

12

 - 

Chain 

oil 

12

  - Filling chain oil 

12

  - Checking automatic  

12

    chain lubrication system

  - Checking chain wear 

12

Filing chain 

13

Limbing  

13

Crosscutting  

14

Felling operations  

14

  - Danger zone  

15

  - Felling direction  

15

  - Clearing branches/Line of retreat  

15

  - Felling  

15

Husqvarna Norge AS

, N-1708 Sarpsborg, Norway hereby declares that the following chain saws:

Partner 1750 and Partner 1950, with serial numbers starting at 54000001 and onwards,

- are manufactured in compliance with EC Directive 98/37/EC (Machinery), EC Directive 73/23/EEC including amendments

 (Low Voltage Directive), EC Directive 89/336/EEC including amendments (Electromagnetic Compatibility Directive), and in

 accordance with annex V of Directive 2000/14/EC (Noise Emission in the environment by equipment for use outdoors)

- are manufactured in compliance with the following harmonized standards: EN 50144-1, EN 50144-2-13, IEC 60745-1  

 and IEC 60745-2-13.

Notifi ed body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has:

- carried out the EC type examination in accordance  with the machinery Directive (98/37/EC) Article 8(2)(c)

- issued EC type examination certifi cates

 No. 404/04/1038 - Partner 1750 and 404/04/1037 - Partner 1950 

pursuant to 

  machinery Directive 98/37/EC, Annex IV (4)

The chain saw submitted is identical to the samples submitted for EC type examination.

The measured and guaranteed sound power levels in accordance with Directive 2000/14/EC are set forth under Technical Data 

in the User’s Manual.

Sarpsborg, 1th of October 2005

  --------------------

Jan Hansen, President

EC DECLARATION OF CONFORMITY

Summary of Contents for 1750

















Reviews: